SH7146 Datasheet, PDF (993/1022 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Main Revisions and Additions in this Edition
Item
Table 1.1 Features
Page Revision (See Manual for Details)
4
Deleted
Items
Specification
Multi-function
•
timer pulse unit 2
(MTU2)
Pulse output modes
One shot, toggle, PWM,
complementary PWM, and reset-
synchronized PWM modes
Table 1.2 Pin Functions
15 Deleted
Classification
Symbol
I/O Name
Function
Advanced user AUDATA3 to O
debugger (AUD) AUDATA0
(only in SH7149 _AUDRST
I
F-ZTAT version
supporting full
AUDMD
I
functions of E10A)
AUD data Branch destination
address output pins.
AUD reset Reset signal input pin.
AUD mode Low-level input when the
AUD function is used.
Figure 3.2 Address Map for Each 53
Operating Mode in SH7149
Table 4.4 Frequency Division
64
Ratios Specifiable with FRQCR
Amended
Amended
Notes: 2. The output frequency of the PLL circuit is the
product of the frequency of the input from the
crystal resonator or EXTAL pin and the
multiplication ratio (×8) of the PLL circuit. This
output frequency must be 80 MHz or lower.
7. …….The MTU2 clock (MPφ) frequency must
be equal to or lower than the MTU2S clock
(MIφ) frequency and the bus clock (Bφ)
frequency, and equal to or higher than the
peripheral clock frequency (Pφ).
Rev. 3.00 May 17, 2007 Page 949 of 974
REJ09B0229-0300