HD64F2636F20 Datasheet, PDF (989/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Section 23A Power-Down Modes [HD64F2636F, HD64F2638F, HD6432636F,
HD6432638F, HD64F2630F, HD6432630F, HD64F2635F, HD6432635F, HD6432634F]
Table 23A-4 MSTP Bits and Corresponding On-Chip Supporting Modules
Register
Bit
Module
MSTPCRA
MSTPA6
Data transfer controller (DTC)
MSTPA5
16-bit timer pulse unit (TPU)
MSTPA3
Programmable pulse generator (PPG)
MSTPA2
D/A converter (channel 0, 1)
MSTPA1
MSTPA0^*1
A/D converter
MSTPCRB
MSTPB7
Serial communication interface 0 (SCI0)
MSTPB6
Serial communication interface 1 (SCI1)
MSTPB5
MSTPB4^*2
MSTPB3^*2
MSTPB0^*1
Serial communication interface 2 (SCI2)
MSTPCRC
MSTPC4
PC break controller (PBC)
MSTPC3
HCAN0
MSTPC2
MSTPC1^*1
MSTPC0^*1
HCAN1
MSTPCRD
MSTPD7
MSTPD6^*1
Motor control PWM (PWM)
Notes: 1. MSTPA0, MSTPB0 and MSTPC1 to MSTPC0 and MSTPD6 are readable/writable bits
with an initial value of 1.
2. The I²C bus interface is available as an option in the H8S/2638 and H8S/2630. In the
H8S/2636, MSTB4 and MSTB3 are readable and writable bits that have 1 as their initial
value.
23A.5.2 Usage Notes
DTC Module Stop: Depending on the operating status of the DTC, the MSTPA7 and MSTPA6
bits may not be set to 1. Setting of the DTC module stop mode should be carried out only when
the respective module is not activated.
For details, refer to section 8, Data Transfer Controller (DTC).
REJ09B0103-0800 Rev. 8.00
May 28, 2010
Page 939 of 1458