HD64F3687GHV Datasheet, PDF (414/566 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 19 Band-Gap Circuit, Power-On Reset, and Low-Voltage Detection Circuits
19.1 Features
• BGR circuit
Supplies stable reference voltage covering the entire operating voltage range and the operating
temperature range.
• Power-on reset circuit
Uses an external capacitor to generate an internal reset signal when power is first supplied.
• Low-voltage detection circuit
LVDR: Monitors the power-supply voltage, and generates an internal reset signal when the
voltage falls below a given value.
LVDI: Monitors the power-supply voltage, and generates an interrupt when the voltage falls
below or rises above respective given values.
Two detection levels for reset generation voltage are available: when only the LVDR circuit is
used, or when the LVDI and LVDR circuits are both used.
• Reset source decision
The source of a reset can be decided by reading the reset source decision register in the reset
exception handler.
VCLSEL
Vcc
VCL
Step-down circuit
BGR
VBGR
RCSTP
On-chip
oscillator
[Legend]
Vcc:
VCL:
VBGR:
VCLSEL:
RCSTP:
LVD (low-voltage
detection circuit)
Power supply
Internal power supply generated from Vcc by the step-down circuit
Reference voltage from BGR
Select signal for the source of the on-chip oscillator power supply
On-chip oscillator stop signal
Figure 19.1 Block Diagram around BGR
Rev. 3.00 Sep. 10, 2007 Page 380 of 528
REJ09B0216-0300