AMD-K6-2E Datasheet, PDF (276/332 Pages) Advanced Micro Devices – AMD-K6™-2E Embedded Processor

AMD-K6™-2E Processor Data Sheet
Preliminary Information
22529B/0—January 2000
14.4
Power Dissipation
Table 52 and Table 53 list the typical and maximum power
dissipation of the AMD-K6-2E processor during normal and
reduced power states.
.
Table 52. Typical and Maximum Power Dissipation for OPN Suffix AMZ (Low-Power Devices)
Clock Control State
233 MHz¹
266 MHz¹
300 MHz^1,3
333 MHz^1,2
350 MHz³
Thermal Power
(Maximum)^4,5
9.00 W
10.00 W
10.00 W
10.00 W
11.00 W
Thermal Power
(Typical)⁶
6.30 W
7.00 W
7.00 W
7.00 W
7.70 W
Stop Grant/Halt
(Maximum)⁷
1.20 W
1.20 W
1.20 W
1.20 W
1.20 W
Stop Clock
(Maximum)⁸
1.00 W
1.00 W
1.00 W
1.00 W
1.00 W
Notes:
1. This specification applies to components using a CLK frequency of 66 MHz.
2. This specification applies to components using a CLK frequency of 95 MHz.
3. This specification applies to components using a CLK frequency of 100 MHz.
4. The maximum power dissipated in the normal clock control state must be taken into account when designing a solution for
thermal dissipation for the AMD-K6-2E processor.
5. Maximum power is determined for the worst-case instruction sequence or function for the listed clock control states with
V_CC2 = 1.9 V, and V_CC3 = 3.3 V.
6. Typical power is determined for the typical instruction sequences or functions associated with normal system operation with
V_CC2 = 1.9 V, and V_CC3 = 3.3 V.
7. The CLK signal and the internal PLL are still running but most internal clocking has stopped.
8. The CLK signal, the internal PLL, and all internal clocking has stopped.
258
Electrical Data
Chapter 14