AMD-K6-2E Datasheet, PDF (273/332 Pages) Advanced Micro Devices – AMD-K6™-2E Embedded Processor

22529B/0—January 2000
Preliminary Information
AMD-K6™-2E Processor Data Sheet
14.2
Absolute Ratings
The AMD-K6-2E processor is not designed to be operated
beyond the operating ranges listed in Table 49. Exposure to
conditions outside these operating ranges for extended periods
of time can affect long-term reliability. Permanent damage can
occur if the absolute ratings listed in Table 50 are exceeded.
Note: If the AMD-K6-2E processor shows a “7” after the date code,
refer to the numbers in the last (rightmost) column of Table
50. The AMD-K6®-2 Revision Guide (order #21641)
available on AMD’s web site contains package marking
details, including the location of the date code
Table 50. Absolute Ratings
Parameter Minimum
V_CC2
V_CC3
V_PIN3
T_CASE (under bias)
T_STORAGE
–0.5 V
–0.5 V
–0.5 V
–65•C
–65•C
Maximum for OPN
Suffixes: 233AFR,
233AMZ, 266AFR,
266AMZ, 300AFR¹
2.6 V
3.6 V
V_CC3 + 0.5 V and < 4.0 V
+110•C
+150•C
Maximum for All OPNs²
2.4 V
3.6 V
V_CC3 + 0.5 V and < 4.0 V
+110•C
+150•C
Notes:
1. The data in this column applies to OPN suffixes 233AFR, 233AMZ, 266AFR, 266AMZ, and
300AFR, provided that the processor is not marked with “7” following the date code (i.e., is
blank).
2. The data in this column applies to all OPNs listed in Table 73, “Valid Ordering Part Number
Combinations,” on page 306 (including 233AFR, 233AMZ, 266AFR, 266AMZ, and 300AFR
when the processor is marked with a “7” following the date code).
3. V_PIN (the voltage on any I/O pin) must not be greater than 0.5 V above the voltage being
applied to V_CC3. In addition, the V_PIN voltage must never exceed 4.0 V.
Chapter 14
Electrical Data
255