AMD-K6-2E Datasheet, PDF (261/332 Pages) Advanced Micro Devices – AMD-K6™-2E Embedded Processor

22529B/0—January 2000
Preliminary Information
AMD-K6™-2E Processor Data Sheet
DR3
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Breakpoint 3 32-bit Linear Address
DR2
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Breakpoint 2 32-bit Linear Address
DR1
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Breakpoint 1 32-bit Linear Address
DR0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Breakpoint 0 32-bit Linear Address
Figure 86. Debug Registers DR3, DR2, DR1, and DR0
DR3–DR0. The processor allows the setting of up to four
breakpoints. DR3–DR0 contain the linear addresses for
breakpoint 3 through breakpoint 0, respectively, and are
compared to the linear addresses of processor cycles to
determine if a breakpoint occurs. Debug register DR7 defines
the specific type of cycle that must occur in order for the
breakpoint to occur.
DR5–DR4. When debugging extensions are disabled (bit 3 of CR4
is 0), the DR5 and DR4 registers are mapped to DR7 and DR6,
respectively, in order to be software compatible with previous
generations of x86 processors. When debugging extensions are
Chapter 12
Test and Debug
243