HD6433937 Datasheet, PDF (19/521 Pages) Hitachi Semiconductor – Hardware Manual

1.3.2 Pin Functions
Table 1-2 outlines the pin functions of the H8/3937 Series and H8/3937R Series.
Table 1-2 Pin Functions
Type
Power
source pins
Symbol
V_CC
V_SS
AV_CC
Pin No.
TFP-100B
TFP-100G
12
52
11
51
99
I/O
Input
Input
Input
AV_SS
8
Clock pins OSC₁
10
OSC₂
9
Input
Input
Output
DX₁
85
DX₂
84
System
control
RES
13
RESO
28
TEST
TESTD
TESTA9H
TEST20 to
TEST24
TEST43
86
83
34
65 to
69
64
Input
Input
Output
Input
Output
Name and Functions
Power supply: All V_CC pins should be
connected to the system power supply.
Ground: All V_SS pins should be connected
to the system power supply (0 V).
Analog power supply: This is the power
supply pin for the A/D converter. When the
A/D converter is not used, connect this pin
to the system power supply.
Analog ground: This is the A/D converter
ground pin. It should be connected to the
system power supply (0V).
These pins connect to a crystal or
ceramic oscillator, or can be used to input
an external clock. See section 4, Clock
Pulse Generators, for a typical connection
diagram.
These pins connect to a 76.8-kHz or
160-kHz crystal oscillator. Output See
section 4, Clock Pulse Generators, for a
typical connection diagram.
Reset: When this pin is driven low, the chip
is reset
Reset output: Outputs the CPU internal
reset signal.
Test pins: These pins are reserved and
cannot be used. They should be connected
to V_SS.
Test pins: These pins are reserved and
cannot be used. They should be left open.
7