80KSBR200 Datasheet, PDF (70/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Name: HOST_BASE_DEV_LOCK_CSRAddress:0x000068
Advanced Datasheet*
Bit
Field Name
Reset
Value
Comment
15:0
HOST_BASE_DID 0xFFFF
31:16 -
0
Host Base Device ID:
This is the host base device ID for the processing element that is
responsible for initializing this device. Only the first write to this field
is accepted, all other writes are ignored, except in the case that the
value written matches the value contained in the field. In this case,
the register is re-written to 0xFFFF.
Reserved.
Note:
1.
Table 23 Host Base Device ID Lock CSR
The above register is described in the RIO Specification Part 3, sec. 3.5.2
Component Tag CSR
The component tag CSR contains a component tag value for the processing element and can be assigned by software
when the device is initialized. It is unused internally in SerB. It is especially useful for labeling and identifying devices that
are not end points and do not have device ID registers.
Name: COMP_TAG_CSR
Address: 0x00006C
Bit
Field Name
Reset
Value
Comment
31:0
COMP_TAG
All 0s
Component Tag:
This is a component tag for the PE.
Note:
1.
Table 24 Component Tag CSR
The above register is described in the RIO Specification Part 3, sec. 3.5.3
70 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.