80KSBR200 Datasheet, PDF (151/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
G13
GND
G15
GND
G17
GND
H6
GND
H8
GND
H10
GND
H12
GND
H14
GND
H16
GND
H20
GND
J7
GND
J9
GND
J11
GND
J13
GND
J15
GND
J17
GND
K6
GND
K8
GND
K10
GND
K12
GND
K14
GND
K16
GND
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Advanced Datasheet*
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
151 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.