80KSBR200 Datasheet, PDF (46/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
DestID
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Bit 5: ITTE
Bit 5: ITTE Yes
Same as previous entry
DestID does
not match this
port’s DeviceID
or Alternate
DeviceID when
enabled
SourceID
Not checked for
error
Transaction-
Type
Bit 4: ITD
Bit 4: ITD
Yes
Same as previous entry
Received RIO
packet with
reserved TType
for this ftype
RdSize
Not checked for
error
SrcTID
Not checked for
error
Address:
Bit 4: ITD
WdPtr:Xambs
Bit 4: ITD
Yes
Same as previous entry
Beginning
address
matches
LCSBA1CSR
with non 32 bit
read request.
(Performed
only when ttype
== 4’b0100)
Header Size Bit 4: ITD
Bit 4: ITD
Yes
Same as previous entry
Header size is
not 12 Bytes for
small Trans-
port packet or
not 16 Bytes for
Large Trans-
port packet.
(Large Trans-
port packet has
14 valid bytes
and two bytes
of 0’s. Padding
of 0’s is not
checked).
Table 5 Hardware Errors for NRead Transaction
Comments
--
--
--
46 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.