80KSBR200 Datasheet, PDF (56/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
Header Size
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Bit 4: ITD
Bit 4: ITD
No
Same as previous entry
Maintenance
Read response
- total payload
size with done
status is not
greater than 4
Bytes.
Comments
RIO packet is
dropped and
ignored
Maintenance
Write response
- total header
size is less than
12 Bytes for
Small Trans-
port packet or
is less than 16
Bytes for Large
Transport
packet.
PayloadSize Bit 4: ITD
Maintenance
write response
has payload
Bit 4: ITD
No
Same as previous entry
RIO packet is
dropped and
ignored
Maintenance
read response
with done sta-
tus and pay-
load not
matching valid
request size or
request size for
the response is
invalid.
Packet
Response
Time-out
Bit 7: PRT
Bit 7: PRT No
Same as previous entry except error --
capture is done from original
request
Response is
not received by
configured
time.
Table 9 Hardware Errors for Maintenance Response Transactions
56 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.