80KSBR200 Datasheet, PDF (154/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
U13
GND
U15
GND
U17
GND
V20
GND
W1
GND
Y19
GND
AB1
GND
AB2
GND
AB16
GND
AB22
GND
G1
GNDA
G3
GNDA
H2
GNDA
M2
GNDA
N1
GNDA
N3
GNDA
Y7
GNDA
Y13
GNDA
AA8
GNDA
AA12
GNDA
AB7
GNDA
AB13
GNDA
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Analog Ground
(CMOS)
Advanced Datasheet*
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
Analog GND. All pins must be tied to single potential ground
plane.
154 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.