80KSBR200 Datasheet, PDF (60/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Errors for Reserved FType
Advanced Datasheet*
Error
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Comments
FType
Bit 4: ITD
Priority of main-
tenance read or
write request
transaction is 3
Bit 4: ITD
No
Using the incoming RIO packet, for RIO packet
Small Transport type packet;
dropped
LTLACCSR[XA] =
packet bits [78:79],
LTLACCSR[A] =
packet bits [48:76],
LTLDIDCCSR[DIDMSB] = 0’s,
LTLDIDCCSR[DID] =
packet bits [16:23],
LTLDIDCCSR[SIDMSB] = 0’s,
LTLDIDCCSR[SID] =
packet bits [24:31],
LTLCCCSR[FT] =
packet bits [12:15],
LTLCCCSR[TT] =
packet bits [32:35]
For Large Transport type packets;
TransportType Bit 28: TSE
Received
reserved TT
Bit 28: TSE No
LTLACCSR[XA] =
packet bits [94:95],
LTLACCSR[A] =
packet bits [64:92],
LTLDIDCCSR[DIDMSB] =
packet bits[16:23],
LTLDIDCCSR[DID] =
packet bits [24:31],
LTLDIDCCSR[SIDMSB] =
packet bits[32:39],
LTLDIDCCSR[SID] =
packet bits [40:47],
LTLCCCSR[FT] =
packet bits [12:15],
LTLCCCSR[TT] =
packet bits [48:51]
Same as previous entry
RIO packet is
dropped
Received TT
which is not
enabled
DestID
Bit 5: ITTE
Bit 5: ITTE Yes
Same as previous entry
--
DestID does
not match this
port’s DeviceID
or Alternate
DeviceID when
enabled
Table 11 Hardware Errors for Reserved Ftype
60 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.