80KSBR200 Datasheet, PDF (152/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
K20
GND
L7
GND
L9
GND
L11
GND
L13
GND
L15
GND
L17
GND
M6
GND
M8
GND
M10
GND
M12
GND
M14
GND
M16
GND
M20
GND
N7
GND
N9
GND
N11
GND
N13
GND
N15
GND
N17
GND
P6
GND
P8
GND
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Advanced Datasheet*
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
152 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.