80KSBR200 Datasheet, PDF (65/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Note:
1. The above register is described in the RIO Specification Part 1, sec. 5.4.1
Advanced Datasheet*
Device Information CAR
The DeviceRev field is intended to identify the revision level of the device. The value for the DeviceRev field is assigned
and managed by the vendor specified by the Device Vendor Identity field.
DICAR is a read only register.
Name: DEV_INFO_CAR
Address: 0x00004
Bit
Field Name
Reset
Value
Comment
31:0
DEV_REV
All 0s
Device Revision Level.
Note:
1.
Table 14 Device Information CAR
The above register is described in the RIO Specification Part 1, sec. 5.4.2
Assembly Identity CAR
The AssyVendorIdentity field identifies the vendor that manufactured the assembly or subsystem containing the device.
A value for the AssyVendorIdentity field is uniquely assigned to a assembly vendor by the registration authority of the RIO
Trade Association.
The AssyIdentity field is intended to uniquely identify the type of assembly from the vendor specified by the AssyVen-
dorIdentity field. The values for the AssyIdentity field are assigned and managed by the respective vendor.
AIDCAR is a read only register.
Name: ASSY_ID_CAR
Address: 0x00008
Bit
Field Name
Reset
Value
Comment
15:0
ASSY_VEND_ID
0x0000
Assembly Vendor Identifier.
31:16 ASSY_ID
0x0000
Assembly Identifier.
Note:
1.
Table 15 Assembly ID CAR
The above register is described in the RIO Specification Part 1, sec. 5.4.3
Assembly Information CAR
AICAR contains additional information about the assembly and the pointer to the first entry in the extended features list.
AICAR is a read only register.
Name: ASSY_INFO_CAR
Address: 0x0000C
Bit
Field Name
15:0
EXT_FEAT_PTR
31:16 ASSY_REV
Reset
Value
Comment
0x0100
0x0001
Extended Features Pointer Field:
Pointer to the first entry in the extended features list.
Assembly Revision Level.
Table 16 Assembly Info CAR
65 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.