80KSBR200 Datasheet, PDF (51/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
Transaction-
Type
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Bit 9: UT
Bit 9: UT
Yes
Same as previous entry
Received RIO
packet for
Atomic test-
and-swap
transaction
Received RIO
packet with
reserved TType
for this ftype
Packet is
treated as
Nwrite Trans-
action
WrSize
Bit 4: ITD
WrSize request
is for one of
reserved sizes
SrcTID
Bit 4: ITD
Yes for
Nwrite_r,
No for
Nwrite
Same as previous entry
Not checked for
error
Address:
Bit 4: ITD
WdPtr:Xambs
Bit 4: ITD
Yes for
Nwrite_r
Same as previous entry
Nwrite_r
address
matches
LCSBA1CSR
with non 32 bit
read request.
(Performed
only when
TType ==
4’b0101)
Header Size
Bit 4: ITD
Header size is
not 12 Bytes for
small Trans-
port packet or
not 16 Bytes for
Large Trans-
port packet.
(Large Trans-
port packet has
14 valid bytes
and two bytes
of 0’s. Padding
of 0’s is not
checked).
Bit 4: ITD
Yes for
Nwrite_r,
No for
Nwrite
Same as previous entry
Table 7 Hardware Errors for RIO Write class Transactions
Comments
--
--
--
--
51 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.