80KSBR200 Datasheet, PDF (126/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Figure 29 Long Run Transmitter AC Timing Specifications - 2.5 GBaud
Figure 30 Long Run Transmitter AC Timing Specifications - 3.125 GBaud
For each baud rate at which an LP-Serial transmitter is specified to operate, the output eye pattern of the transmitter
shall fall entirely within the un-shaded portion of the Transmitter Output Compliance Mask shown in Figure 30 with the
parameters specified in Figure 31. The eye pattern is measured at the output pins of the device and the device is driving a
100 Ohm +/- 5% differential resistive load. The output eye pattern of a LP-Serial transmitter that implements pre-emphasis
(to equalize the link and reduce inter-symbol interference) need only comply with the Transmitter Output Compliance Mask
when pre-emphasis is disabled or minimized.
126 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.