80KSBR200 Datasheet, PDF (150/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
C1
GND
C3
GND
C18
GND
D1
GND
D3
GND
D10
GND
D12
GND
E7
GND
E9
GND
E11
GND
E13
GND
F6
GND
F8
GND
F10
GND
F12
GND
F14
GND
F16
GND
F19
GND
F21
GND
G7
GND
G9
GND
G11
GND
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Advanced Datasheet*
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
150 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.