80KSBR200 Datasheet, PDF (114/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
11.0 Absolute Maximum Ratings⁽¹⁾
Advanced Datasheet*
Note:
1.
2.
3.
Symbol
V_TERM (VDD3)
V_TERM(2)
(VDD3-supplied interfaces)
V_TERM (VDD)
V_TERM(2)
(VDD-supplied interfaces)
V_TERM (VDDS)
V_TERM(2)
(VDDS-supplied interfaces)
V_TERM (VDDA)
V_TERM(2)
(VDDA-supplied interfaces)
T_BIAS(3)
T_STG
T_JN
I_OUT (For VDD3 = 3.3V)
I_OUT (For VDD3 = 2.5V)
Rating
Commercial & Industrial Unit
VDD3 Terminal Voltage with -0.5 to 3.6
V
Respect to GND
Input or I/O Terminal Voltage -0.3 to VDD3+0.3
V
with
Respect to GND
VDD Terminal Voltage with
-0.5 to 1.5
V
Respect to GND
Input or I/O Terminal Voltage -0.3 to VDD+0.3
V
with
Respect to GND
VDDS Terminal Voltage with -0.5 to 1.5
V
Respect to GNDS
Input or I/O Terminal Voltage -0.3 to VDDS+0.3
V
with Respect to GNDS
VDDA Terminal Voltage with -0.5 to 1.5
V
Respect to GNDS
Input or I/O Terminal Voltage -0.3 to VDDA+0.3
V
with
Respect to GNDS
Temperature Under Bias
-55 to +125
C
Storage Temperature
-65 to +150
C
Junction Temperature
+150
C
DC Output Current
30
mA
DC Output Current
30
mA
Table 97 Absolute Maximum Ratings
Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
This is a steady-state DC parameter that applies after the power supply has reached its nominal operating
value. Power sequencing is not necessary; however, the voltage on any Input or I/O pin cannot exceed its
corresponding supply voltage during power supply ramp up.
Ambient Temperature under DC Bias. No AC Conditions.
114 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.