80KSBR200 Datasheet, PDF (155/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
C7
GNDS
C9
GNDS
D5
GNDS
E2
GNDS
E4
GNDS
F5
GNDS
H4
GNDS
H5
GNDS
K2
GNDS
K4
GNDS
K5
GNDS
M4
GNDS
M5
GNDS
P5
GNDS
R2
GNDS
R4
GNDS
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
SERDES
Ground
(CMOS)
Advanced Datasheet*
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
Analog GND for TX/RX pairs. All pins must be tied to single
potential ground plane.
155 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.