80KSBR200 Datasheet, PDF (153/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
P10
GND
P12
GND
P14
GND
P16
GND
P20
GND
R7
GND
R9
GND
R11
GND
R13
GND
R15
GND
R17
GND
T6
GND
T8
GND
T10
GND
T12
GND
T14
GND
T16
GND
T20
GND
U5
GND
U7
GND
U9
GND
U11
GND
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Digital Ground
(CMOS)
Advanced Datasheet*
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
Digital GND. All pins must be tied to single potential ground
plane.
153 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.