80KSBR200 Datasheet, PDF (49/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
Header Size
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Bit 4: ITD
Bit 4: ITD
Yes
Same as previous entry
Header size is
not 12 Bytes for
small Trans-
port packet or
not 16 Bytes for
Large Trans-
port packet.
(Large Trans-
port packet has
14 valid bytes
and two bytes
of 0’s. Padding
of 0’s is not
checked).
PayloadSize Bit 4: ITD
Bit 4: ITD
Yes
Same as previous entry
Write request
with payload
not equal to 8
bytes
Read request
with payload
not 0 bytes
Table 6 Hardware Errors for Maintenance Read/Write Request Transaction
Comments
--
--
49 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.