80KSBR200 Datasheet, PDF (47/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
PayloadSize
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Not Applicable
Table 5 Hardware Errors for NRead Transaction
Comments
Errors for Maintenance Read/Write Request Transaction
Error
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Comments
Priority
Bit 4: ITD
Priority of main-
tenance read or
write request
transaction is 3
Bit 4: ITD
No
Using the incoming RIO packet, for RIO packet
Small Transport type packet;
dropped
LTLACCSR[XA] =
packet bits [78:79],
LTLACCSR[A] =
packet bits [48:76],
LTLDIDCCSR[DIDMSB] = 0’s,
LTLDIDCCSR[DID] =
packet bits [16:23],
LTLDIDCCSR[SIDMSB] = 0’s,
LTLDIDCCSR[SID] =
packet bits [24:31],
LTLCCCSR[FT] =
packet bits [12:15],
LTLCCCSR[TT] =
packet bits [32:35]
For Large Transport type packets;
LTLACCSR[XA] =
packet bits [94:95],
LTLACCSR[A] =
packet bits [64:92],
LTLDIDCCSR[DIDMSB] =
packet bits[16:23],
LTLDIDCCSR[DID] =
packet bits [24:31],
LTLDIDCCSR[SIDMSB] =
packet bits[32:39],
LTLDIDCCSR[SID] =
packet bits [40:47],
LTLCCCSR[FT] =
packet bits [12:15],
LTLCCCSR[TT] =
packet bits [48:51]
Table 6 Hardware Errors for Maintenance Read/Write Request Transaction
47 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.