80KSBR200 Datasheet, PDF (59/172 Pages) Integrated Device Technology – sRIO SERIAL BUFFER FLOW-CONTROL DEVICE

IDT 80KSBR200
Notes
Advanced Datasheet*
Error
Packet Size
Interrupt
Generated if
enable bit
set on
LTLEECSR
Status Bit RIO Error
set on
Response
LTLEDCSR Generated
Logical/Transport Layer
Capture Register
Bit 4: ITD
Bit 4: ITD
No
Same as previous entry
(All non-main-
tenance and
non-message).
Comments
RIO packet is
dropped and
ignored
Write response
- Header size in
not 8 Bytes for
Small Trans-
port packet or
not 12 Bytes for
Large Trans-
port packet.
PayloadSize Bit 4: ITD
IO - Read
Response -
total payload is
not of the size
requested.
Packet
response
time-out
Bit 7: PRT
Bit 4: ITD
No
Bit 7: PRT Yes
Same as previous entry
RIO packet is
dropped and
ignored
Same as previous entry except error Interrupt is
capture is done from original
generated
request
Response is
not received by
configured time
for packets
requiring RIO
response.
Done response
is not received
in configured
time.
Table 10 Hardware Error for Response Transactions
59 of 172
March 19, 2007
„2005 Integrated Device Technology, Inc. All rights reserved. Advanced Datasheet for informational purposes only. Product specifications subject to change without notice.NOT AN OFFER FOR SALE The information presented herein is subject to a
Non-Disclosure Agreement (NDA) and is for planning purposes only. Nothing contained in this presentation, whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.