MB86296 Datasheet, PDF (99/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
The Captured area is defined according to the following parameters. Each parameter is set
independently at the respective register.:
RGBVST
RGBHST
RGBHC
RGBHEN(~840)
VSYNC
RGBVEN
(~4096)
captured
RGBHC
RGBHST
RGBHEN
RGBVST
RGBVEN
RGB input Hsync Cycle
RGB input Horizontal enable area STart position
RGB input Horizontal enable area size
RGB input Vertical ENable area STart position
RGB input Vertical ENable area size
Note: The actual parameter settings are little different from the above. The details,
please refer “Explanation of Registers”.
e) Convert Matrix Coefficient
In order to change the color conversion matrix, set up RGBCMY, RGBCb, RGBCr and
RGBCMb.
Note:
- The maximum horizontal enable area size(RGBHEN) which can be captured is 840 pixels.
This is the restriction by line buffer size in a video capture module.
MB86296S <Coral-PA>
89
Specification Manual Rev0.1