MB86296 Datasheet, PDF (158/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
DrawRectP (Format5)
31
24 23
16 15
0
DrawRectP
Command
Reserved
RYs
RXs
RsizeY
RsizeX
The DrawRectP command fills rectangle. The rectangle is filled with the current color after setting
parameters at the rectangle registers. Please set XRES(X resolution) to in 8 byte units when using
this command.
Commands:
BltFill
Fills rectangle with current color (single).
ClearPolyFlag
Fills polygon drawing flag buffer area with 0. The size of drawing
frame is defined in RsizeX,Y.
DrawBitmapP (Format6)
31
24 23
16 15
0
DrawBitmapP
Command
Count
RYs
RXs
RsizeY
RsizeX
(Pattern 0)
(Pattern 1)
⋅⋅⋅
(Pattern n)
The DrawBitmapP command draws rectangle patterns. Please set XRES(X resolution) to in 8 byte
units when using this command.
Commands:
BltDraw
Draws rectangle of 8 bits/pixel or 16 bits/pixel.
DrawBitmap
Draws binary bitmap character pattern. Bit 0 is drawn in transparent
or background color, and bit 1 is drawn in foreground color.
DrawBitmapLargeP (Format11)
31
24 23
16 15
0
DrawBitmapLargeP
Command
Reserved
Count
Rys
Rxs
RsizeY
RsizeX
(Pattern 0)
(Pattern 1)
⋅⋅⋅
(Pattern n)
The DrawBitmapP command draws rectangle patterns.
The parameter(count field) could be used up to 32-bit(*1) unlike DrawBitmapP.
(*1: The data format of counter field is signed long. Thus actually it is possible to use up to 31-bit.)
Please set XRES(X resolution) to in 8 byte units when using this command.
Commands:
BltDraw
Draws rectangle of 8 bits/pixel or 16 bits/pixel.
MB86296S<Coral-PA>
148
Specification Manual Rev0.1