MB86296 Datasheet, PDF (138/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
11.2.2 Explanation of geometry commands
G_Nop (Format 1)
31
24 23
16 15
0
G_Nop
Reserved
Reserved
No operation
G_Init (Format 1)
31
24 23
16 15
0
G_Init
Reserved
Reserved
The G_Init command initializes geometry engine. Execute this command before processing.
G_End (Format 1)
31
24 23
16 15
0
G_End
Reserved
Reserved
The G_End command ends one primitive. The G_Vertex command must be specified between
the G_Begin command and G_End command.
MB86296S<Coral-PA>
128
Specification Manual Rev0.1