MB86296 Datasheet, PDF (154/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
DrawLine (Format5)
31
24 23
16 15
0
DrawLine
Command
Reserved
LPN
LXs
LXde
LYs
LYde
The DrawLine command draws line. It starts drawing after setting all parameters at line draw
registers.
Commands:
Xvector
Draws line (principal axis X).
Yvector
Draws line (principal axis Y).
XvectorNoEnd
Draws line (principal axis X, and without end pointdrawing ).
YvectorNoEnd
Draws line (principal axis Y, and without end point drawing).
XvectorBlpClear
Draws line (principal axis X, and prior to drawing, broken line
pattern reference position cleared).
YvectorBlpClear
Draws line (principal axis Y, and prior to drawing, broken line
pattern reference position cleared).
XvectorNoEndBlpClear
Draws line (principal axis X, without end point drawing and prior
to drawing, broken line pattern reference position cleared).
YvectorNoEndBlpClear
Draws line (principal axis Y, without end point drawing and prior
to drawing, broken line pattern reference position cleared).
AntiXvector
Draws anti-alias line (principal axis X).
AntiYvector
Draws anti-alias line (principal axis Y).
AntiXvectorNoEnd
Draws anti-alias line (principal axis X, and without end point
drawing).
AntiYvectorNoEnd
Draws anti-alias line (principal axis Y, and without end point
drawing).
AntiXvectorBlpClear
Draws anti-alias line (principal axis X and prior to drawing,
broken line pattern reference position cleared).
AntiYvectorBlpClear
Draws anti-alias line (principal axis Y and prior to drawing,
broken line pattern reference position cleared).
AntiXvectorNoEndBlpClear Draws anti-alias line (principal axis X, without end point drawing
and prior to drawing, broken line pattern reference position
cleared).
AntiYvectorNoEndBlpClear Draws anti-alias line (principal axis Y, without end point drawing
and prior to drawing, broken line pattern reference position
cleared).
MB86296S<Coral-PA>
144
Specification Manual Rev0.1