MB86296 Datasheet, PDF (34/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
A 11 VL
A 10 MD59
A 9 MD60
B 10 MD61
C 10 MD62
D 10 MD63
A8
VL
B 9 CCLK
D 8 VS
A 7 DACT
C 9 MST
D 9 XSM
B 8 SMCK
A 6 XTST
B 7 AOB
C 8 AVD2
D 6 COMB
A 5 AVS2
B 6 AOG
C 7 AVD1
A 4 COMG
D 7 AVS1
A 1 NC
B 5 AOR
C 6 AVD0
A 3 VRO
B 4 AVS0
C 5 VREF
A 2 COMR
D 5 XRE
B 3 GI0
C 4 GI1
C 3 GI2
MB86296S<Coral-PA>
Specification Manual Rev0.1
- VDDL 1.8V power supply.
I/O Graphics memory data bit 59. May also be
configured as ITU-RBT-656 video capture data input
bit 3 (VI3). When the RGB input is enabled this pin
acts as Blue[3].
I/O Graphics memory data bit 60. May also be
configured as ITU-RBT-656 video capture data input
bit 4 (VI4). When the RGB input is enabled this pin
acts as Blue[4].
I/O Graphics memory data bit 61. May also be
configured as ITU-RBT-656 video capture data input
bit 5 (VI5). When the RGB input is enabled this pin
acts as Blue[5].
I/O Graphics memory data bit 62. May also be
configured as ITU-RBT-656 video capture data input
bit 6 (VI6). When the RGB input is enabled this pin
acts as HSYNC.
I/O Graphics memory data bit 63. May also be
configured as ITU-RBT-656 video capture data input
bit 7 (VI7). When the RGB input is enabled this pin
acts as VSYNC.
- VDDL 1.8V power supply.
Input ITU-RBT-656 video capture clock input.
- VSS - ground.
Input Test signal.
Input Test signal.
Input Test Signal.
Input Test Signal.
Input Test Signal.
Output Analog Signal (B) output
- Analog Power Supply(3.3V)
Output Analog B Signal Compensation pin
- Analog Ground
Output Analog Singnal (G) output
- Analog Power Supply(3.3V)
Output Analog G Signal Compensation pin
- Analog Ground
- Not connected.
Output Analog Singnal (R) output
- Analog Power Supply(3.3V)
Output Analog Reference current output
- Analog Ground
Input Analog Reference Voltage input
Output Analog R Signal Compensation pin
Input RGB output/video input/I²C enable.
GI0 RGB Input Green[0]. May also be configured as
GPIO input.
GI1 RGB Input Green[1]. May also be configured as
GPIO input.
GI2 RGB Input Green[2]. May also be configured as
GPIO input.
24