MB86296 Datasheet, PDF (41/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
2.3.4 I²C interface
Pin name
SDA
SCL
I/O
I/O
I/O
Description
I²C or Video capture test signal. This pin is
multiplexed MD54.
I²C or Video capture test signal. This pin is
multiplexed MD55.
I²C interface signals can be used only when the XRE pin is “0”. MD55-MD54 are assigned as the
I²C interface pins.
When I²C interface is not used and the XRE pin is 0, input the “High” level to MD63-MD56.
Note)
Input voltage level is 3.3V. Please be careful, it does not support to 5V input.
(The device whose output voltage is 5V is not connectable.)
MB86296S <Coral-PA>
31
Specification Manual Rev0.1