MB86296 Datasheet, PDF (327/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
15.3 Recommended Operating Conditions
15.3.1 Recommended operating conditions
Recommended Operating Conditions
Parameter
Symbol
Min.
Rating
Typ.
Supply voltage
VDDL ^*1
VDDH
AVD
1.65
1.8
3.0
3.3
2.7
3.3
Current consumption (on 1.8V)
Current consumption (on 3.3V)
Input voltage (High level)
Input voltage (low level)
Input voltage to VREF
I1.8V
I3.3V
VIH
VIL
VREF
500
100
2.0
−0.3
1.05
1.10
VRO External resistance
RREF
2.7
AOUT External resistance*²
RL
75
ACOMP External capacitance*³
CACOMP
0.1
Ambient temperature for operation TA
-40
*1 Includes PLL power supply
*2 AOUTR, AOUTG, AOUTB pins
*3 ACOMPR, ACOMPG, ACOMPB pins
Max.
1.95
3.6
3.6
VDDH+0.3
0.8
1.15
85
Unit
V
mA
mA
V
V
V
K ohm
ohm
uF
°C
<Note>
Recommended operating conditions are normal operating ranges for the semiconductor device.
All the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation
outside these ranges may adversely affect reliability and could result in device failure. No
warranty is made with respect to uses, operating conditions, or combinations not represented on
the manual. Users considering application outside the listed conditions are advised to contact
their FUJITSU representative beforehand.
MB86296S <Coral-PA>
317
Specification Manual Rev0.1