MB86296 Datasheet, PDF (30/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
U 3 VH
- VDDH 3.3V power supply.
V 3 DSEL I/O PCI Device Select (DEVSEL).
W 2 IRDY I/O PCI Initiator Ready.
W 3 STOP I/O PCI Stop.
V 4 SERR Output PCI System Error.
(open drain)
U 5 VS
- VSS - ground.
Y 2 TRDY I/O PCI Target Ready.
V 5 VH
- VDDH 3.3V power supply.
W 4 PAR I/O PCI Parity.
Y 3 PERR I/O PCI Parity Error.
V 6 AD14 I/O PCI address/data bit 14.
W 5 CBE1 I/O PCI command/byte enable 1.
U 4 VS
- VSS - ground.
U7
VL
- VDDL 1.8V power supply.
V 7 AD11 I/O PCI address/data bit 11.
Y 4 VH
- VDDH 3.3V power supply.
W 6 AD13 I/O PCI address/data bit 13.
Y 5 AD15 I/O PCI address/data bit 15.
U 6 VS
- VSS - ground.
V 8 AD08 I/O PCI address/data bit 8.
W 7 AD10 I/O PCI address/data bit 10.
Y 6 AD12 I/O PCI address/data bit 12.
W 8 VH
- VDDH 3.3V power supply.
U9
VL
- VDDL 1.8V power supply.
V 9 AD07 I/O PCI address/data bit 7.
Y 7 AD09 I/O PCI address/data bit 9.
U 8 VS
- VSS - ground.
W 9 AD06 I/O PCI address/data bit 6.
Y 8 CBE0 I/O PCI command/byte enable 0.
V 10 AD04 I/O PCI address/data bit 4.
W 10 VH
- VDDH 3.3V power supply.
Y 9 AD05 I/O PCI address/data bit 5.
U 10 VS
- VSS - ground.
Y 10 AD03 I/O PCI address/data bit 3.
Y 11 AD01 I/O PCI address/data bit 1.
Y 12 AD00 I/O PCI address/data bit 0.
W 11 AD02 I/O PCI address/data bit 2.
V 11 VL
- VDDL 1.8V power supply.
U 11 VH
- VDDH 3.3V power supply.
Y 13 CKM Input Clock Mode. If low then the output from the internal
PLL is used as the internal clock. If high then the
PCI clock is used.
W 12 PVS
- PLL Ground.
U 13 VS
- VSS - ground.
Y 14 CLK Input Clock input.
V 12
S
Input PLL reset.
U 12 PVD
- PLL 1.8V power supply.
W 13 VL
- VDDL 1.8V power supply.
MB86296S<Coral-PA>
20
Specification Manual Rev0.1