MB86296 Datasheet, PDF (40/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
2.3.3 Video capture interface
1. ITU-656 Input Signals
Pin name
CCLK
VI7-0
Table 2-3 Video Capture Interface Pins
I/O
Description
Input Digital video input clock signal input
Input
ITU656 Digital video data input. These pins are multiplexed MD63-
MD56.
Inputs ITU-RBT-656 format digital video signal
Digital video data input can be used only when the XRE pin is “0”. MD63-MD56 are assigned as
the digital video data input pins.
When video capture is not used and the XRE pin is 0, input the “High” level to MD63-MD56.
2. RGB Input Signals
The signals used for video capture are not assigned on dedicated pins but share the same pins
with other functions. There is a set of signals corresponding to the RGB capture modes.
Direct Input Mode
Pin name I/O
RGBCLK Input
RI5-0
Input
GI5-0
Input
BI5-0
Input
VSYNCI Input
HSYNCI Input
Description
Clock for RGB input. This pin is multiplexed CCLK.
Red component value. These pins are multiplexed EE, EDI, ECS,
ECK, EDO and BC.
Green component value. These pins are multiplexed SB and GPI4-
GPI0.
Blue component value. These pins are multiplexed MD61-MD56.
Vertical sync for RGB capture. This pin is multiplexed MD63.
Horizontal sync for RGB capture. This pin is multiplexed MD62.
Note :
- the RGB bit of VCM(video capture mode) register enables RGB input mode of video
capture.
MB86296S<Coral-PA>
30
Specification Manual Rev0.1