MB86296 Datasheet, PDF (133/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
11.1.1 Header format
The format of the display list header is shown below.
Format 31
Format 1
Type
Format 2
Type
Format 3
Type
Format 4
Type
Format 5
Type
Format 6
Type
Format 7
Type
Format 8
Type
Format 9
Type
Format 10
Type
Format 11
Type
Format List
24 23
16 15
Reserved
Count
Reserved
Reserved
Command
Command
Command
Command
Reserved
Reserved
Reserved
Count
Reserved
Address
Reserved
Reserved
Reserved
Count
Reserved
Reserved
Reserved
Count
Reserved
0
Vertex
Flag Vertex
Vertex
Flag Vertex
Flag
Type
Command
Count
Address
Vertex
Flag
Vertex
00
01
10
11
Description of Each Field
Display list type
Command
Count of data excluding header
Address value used at data transfer
Vertex number
Attribute flag peculiar todisplay list command
Vertex Number Specified in Vertex Code
Vertex number (Line)
V0
V1
Setting prohibited
Setting prohibited
Vertex number (Triangle)
V0
V1
V2
Setting prohibited
11.1.2 Parameter format
The parameter format of the geometry command depends on the value set in the D field of GMDR0.
When the D field is “00”, all parameters are handled in the floating-point format. When the D field is
“01”, colors are handled as the packed RGB format, and others are handled as the fixed-point format.
When the D field is “11”, XY is handled as the packed integer format, colors are handled as the
packed RGB format, and others are handled as the fixed-point format.
In the following text, the floating-point format is suffixed by .float, the fixed point format is suffixed
by .fixed, and the integer format is suffixed by .int. Set GMDR0 properly to match parameter
suffixes.
Rendering command parameters conform to the Coral-PA data format.
MB86296S <Coral-PA>
123
Specification Manual Rev0.1