MB86296 Datasheet, PDF (35/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
Notes
V_SS/PLLV_SS
V_DDH
V_DDL/PLLV_DD
PLLV_DD
OPEN
TESTH
AVS
AVD
: Ground
: 3.3-V power supply
: 1.8-V power supply
: PLL power supply (1.8 V)
: Do not connect anything.
: Input a 3.3 V-power supply.
: Analog Ground
: Analog power supply (3.3 V)
- It is recommended that PLLV_DD should be isolated on the PCB.
- It is recommended that AVD should be isolated on the PCB.
- Insert a bypass capacitor with good high frequency characteristics between the power supply and
ground.
Place the capacitor as near as possible to the pin.
MB86296S <Coral-PA>
25
Specification Manual Rev0.1