MB86296 Datasheet, PDF (309/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
0 Bold line drawn vertical to principal axis of line (compatible with CREMSON)
Operation is not assured when TM = 0 is used together with TC = 1, SP = 1, or BP = 1.
1 Bold line drawn vertical to theoretical line
Operation is not assured when TM = 1 is used together with BM = 0.
Bit 9 BP (Border Primitive)
Sets the drawing mode for the border primitive
0 Border primitive not drawn
1 Border primitive drawn
Bit 8
SP (Shadow Primitive)
Sets the drawing mode for the shadow primitive
0 Shadow primitive not drawn
1 Shadow primitive drawn
Bit 4
BO (Broken line Offset)
Sets the reference position of the dashed-line pattern
0 Reference position of dashed-line pattern cleared
1 Reference position of dashed-line pattern not cleared
Bit 2
EP (End Point mode)
Sets the drawing mode for the end point
Note that the end point is always not drawn in line strip
0 End point not drawn
1 End point drawn
Bit 0
AA (Anti-alias mode)
Sets anti-alias mode
0 Anti-alias not performed
1 Anti-alias performed
MB86296S <Coral-PA>
299
Specification Manual Rev0.1