MB86296 Datasheet, PDF (264/352 Pages) Fujitsu Component Limited. – PCI Graphics Controller Specification

FUJITSU LIMITED PRELIMINARY AND CONFIDENTIAL
Bit13
0
1
BED (Big EnDian)
Endian is reversed
Little endian (enable display)
Big endian (disable display)
Bit14
C24
Bit23-16
CBW (Capture Buffer memory Width)
Sets memory width (stride) of capture buffer in 64 bytes
Bit28
PAU (PAUse)
It is shown that capture operation is Stop temporarily. 0 can be written and it can cancel.
0
Under operation
1
Stop temporarily
Bit29
CRGB ( Capture RGB write)
It specifies changing and writing the data of YcbCr form in RGB=5:5:5 (16 bits/pixel).
0
YcbCr form (without change)
1
RGB form
Bit30
0
1
SBUF (Single Buffer)
It specifies managing a capture buffer by the single buffer system.
Normal mode (ring buffer)
Single buffer mode
Bit31
OO (Odd Only mode)
Specifies whether to capture odd fields only
0
Normal mode
1
Odd only mode
Note: This register is not initialized by soft reset.
MB86296S<Coral-PA>
254
Specification Manual Rev0.1