MC68HC08BD24 Datasheet, PDF (97/244 Pages) Motorola, Inc – HCMOS Microcontroller Unit

A break interrupt during stop mode sets the SIM break stop/wait bit
(SBSW) in the SIM break status register (SBSR).
The SIM counter is held in reset from the execution of the STOP
instruction until the beginning of stop recovery. It is then used to time the
recovery period. Figure 7-16 shows stop mode entry timing.
CPUSTOP
IAB
STOP ADDR
STOP ADDR + 1
SAME
SAME
IDB
PREVIOUS DATA
NEXT OPCODE
SAME
SAME
R/W
NOTE: Previous data can be operand data or the STOP opcode, depending on the last instruction.
Figure 7-16. Stop Mode Entry Timing
OSCXCLK
INT/BREAK
IAB
STOP RECOVERY PERIOD
STOP +1
STOP + 2 STOP + 2
SP
SP – 1
SP – 2
SP – 3
Figure 7-17. Stop Mode Recovery from Interrupt or Break
MC68HC08BD24 — Rev. 1.1
Freescale Semiconductor
Technical Data
97