MC68HC11G5 Datasheet, PDF (169/195 Pages) Motorola, Inc – High-density Complementary Metal Oxide Semiconductor (HCMOS) Microcontroller

Freescale Semiconductor, Inc.
13.4 DC ELECTRICAL CHARACTERISTICS
(VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = TL to TH unless otherwise noted)
Characteristic
Symbol Min
Max Unit
Output Voltage
All outputs VOL
—
0.1
V
ILoad = ± 10.0µA (See Note 1)
All outputs except RESET and MODA VOH VDD - 0.1
—
Output High Voltage
All outputs except VOH VDD - 0.8
—
V
ILoad = - 0.8mA, VDD = 4.5V (See Note 1)
RESET, XTAL and MODA
Output Low Voltage
ILoad = 1.6mA
All outputs except XTAL VOL
—
0.4
V
Input High Voltage
RESET VIH 0.8 x VDD VDD
V
All inputs except RESET VIH 0.7 x VDD VDD
Input Low Voltage
ILoad = 1.6mA
All Inputs VIL
—
0.8
V
I/O Ports, Three-state Leakage
Vin = VIH or VIL
PA0-7, PC0-7, PD0-5, PG0-7, IOZ
—
PH0-7, PJ0-3, MODA/ LIR, RESET
±10
µA
Input Current
Vin = VDD or VSS
All Inputs Iin
—
±1.0
µA
RAM Standby Voltage
Powerdown VSB
2.0
VDD
V
RAM Standby Current
Powerdown ISB
—
20
µA
Total Supply Current (See Note 2)
RUN:
Single-Chip Mode
WAIT: (All Peripheral Functions Shut Down)
Single-Chip Mode
STOP: (No Clocks)
Single-Chip Mode
IDD
IDD (run)
—
IDD (wait)
—
IDD (stop)
—
30
mA
15
mA
100
µA
Input Capacitance
IRQ, XIRQ, EXTAL Cin
—
MODA/ LIR, RESET, all Ports except Port E Cin
—
12
pF
12
pF
NOTES:
1. VOH specification for RESET and MODA is not applicable because they are open-
drain pins.
VOH specification is not applicable to ports C and D in wired-OR mode.
2. All ports configured as inputs,
VIL ≤ 0.2V,
VIL ≥ VDD - 0.2V,
No dc loads,
EXTAL is driven with a square wave, and
tcyc = 476.5ns.
ELECTRICAL SPECIFICATIONS
13-3
For More Information On This Product,
Go to: www.freescale.com