AMIC110 Datasheet, PDF (7/214 Pages) Texas Instruments – Sitara Processors

www.ti.com
AMIC110
SPRS971A – AUGUST 2016 – REVISED SEPTEMBER 2016
3 Device Comparison
Table 3-1 lists the features supported on the AMIC110 device.
Table 3-1. Device Features Comparison
FUNCTION
AMIC110
ARM Cortex-A8
Yes
Frequency
300 MHz
MIPS
600
On-chip L1 cache
64KB
On-chip L2 cache
256KB
Graphics accelerator (SGX530)
—
Hardware acceleration
—
Programmable real-time unit subsystem and industrial communication subsystem (PRU-
ICSS)
Features including all Industrial protocols
On-chip memory
Display options
128KB
Not supported⁽¹⁾
General-purpose memory
1 16-bit (GPMC, NAND flash, NOR flash, SRAM)
DRAM
1 16-bit (LPDDR-400, DDR2-532, DDR3-800)
Universal serial bus (USB)
Ethernet media access controller (EMAC) with 2-port switch
ZCZ: 2 ports
Not supported⁽¹⁾
Multimedia card (MMC)
3
Controller-area network (CAN)
2
Universal asynchronous receiver and transmitter (UART)
6
Analog-to-digital converter (ADC)
8-ch 12-bit
Enhanced high-resolution PWM modules (eHRPWM)
Enhanced capture modules (eCAP)
Enhanced quadrature encoder pulse (eQEP)
3
Not supported⁽¹⁾
Not supported⁽¹⁾
Real-time clock (RTC)
1
Inter-integrated circuit (I²C)
3
Multichannel audio serial port (McASP)
2
Multichannel serial port interface (McSPI)
2
Enhanced direct memory access (EDMA)
64-Ch
Input/output (I/O) supply
1.8 V, 3.3 V
Operating temperature range
–40 to 105°C
DEV_FEATURE register value
0x00FF0383
(1) Features noted as "not supported" must not be used. Features that are "not supported" may not function, meet performance criteria, or
be tested. Even if an unsupported feature may seem useable in part, exercising the unsupported feature would constitute misuse of the
device and may void the warranty of the device.
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AMIC110
Device Comparison
7