AMIC110 Datasheet, PDF (153/214 Pages) Texas Instruments – Sitara Processors

www.ti.com
AMIC110
SPRS971A – AUGUST 2016 – REVISED SEPTEMBER 2016
Table 7-40. DQS[x] and DQ[x] Routing Specification⁽¹⁾
NO.
PARAMETER
MIN
TYP
MAX UNIT
1 Center-to-center DQS[x] spacing
2 DQS[x] differential pair skew length mismatch⁽²⁾
3 Center-to-center DDR_DQS[x] to other DDR2 trace spacing⁽³⁾
4 DQS[x] and DQ[x] nominal trace length⁽⁴⁾
5 DQ[x]-to-DQS[x] skew length mismatch⁽⁴⁾
6 DQ[x]-to-DQ[x] skew length mismatch⁽⁴⁾
7 Center-to-center DQ[x] to other DDR2 trace spacing⁽³⁾⁽⁵⁾
8 Center-to-center DQ[x] to other DQ[x] trace spacing⁽³⁾⁽⁶⁾
4w
DQLM-50
4w
3w
2w
25 mils
DQLM
DQLM+50 mils
100 mils
100 mils
(1) DQS[x] represents the DQS0 and DQS1 clock net classes, and DQ[x] represents the DQ0 and DQ1 signal net classes.
(2) Differential impedance should be Zo x 2, where Zo is the single-ended impedance defined in Table 7-31.
(3) Center-to-center spacing is allowed to fall to minimum (w) for up to 500 mils of routed length to accommodate BGA escape and routing
congestion.
(4) There is no requirement for skew matching between data bytes; that is, from net classes DQS0 and DQ0 to net classes DQS1 and DQ1.
(5) Signals from one DQ net class should be considered other DDR2 traces to another DQ net class.
(6) DQLM is the longest Manhattan distance of each of the DQS[x] and DQ[x] net classes.
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AMIC110
Peripheral Information and Timings 153