AMIC110 Datasheet, PDF (204/214 Pages) Texas Instruments – Sitara Processors

AMIC110
SPRS971A – AUGUST 2016 – REVISED SEPTEMBER 2016
www.ti.com
X AMIC110 B
PREFIX
X = Experimental device
Blank = Qualified device
ZCZ A ( )
CARRIER TYPE
Blank = Tray
R = Tape and Reel
DEVICE^(A)
ARM Cortex-A8 MPU:
AMIC110
TEMPERATURE RANGE
A = -40°C to 105°C (extended junction temperature)
DEVICE REVISION CODE
B = silicon revision 2.1
PACKAGE TYPE^(B)
ZCZ = 324-pin plastic BGA, with Pb-Free solder balls
A. The AMIC110 device shown in this device nomenclature example is one of several valid part numbers for the
AMIC110 family of devices. For orderable device part numbers, see the Package Option Addendum of this document.
B. BGA = Ball grid array
Figure 8-1. AMIC110 Device Nomenclature
8.2 Tools and Software
TI offers an extensive line of development tools. Tools and software to evaluate the performance of the
device, generate code, and develop solutions are listed below.
NOTE
Unless otherwise specifically available, please use AM335x documentation, models, tools,
and so on.
Design Kits and Evaluation Modules
AM335x Industrial Communications Engine A development platform targeted for systems that
specifically focus on the industrial communications capabilities of the Sitara AM335x ARM
Cortex-A8 Processors.
TI Designs
EtherCAT Communications Development Platform Allows designers to implement real-time EtherCAT
communications standards in a broad range of industrial automation equipment. It enables
low foot print designs in applications such as industrial automation, factory automation or
industrial communication with minimal external components and with best in class low power
performance.
PROFIBUS Communications Development Platform Allows designers to implement PROFIBUS
communications standards in a broad range of industrial automation equipment. It enables
low foot print designs in applications such as industrial automation, factory automation or
industrial communication with minimal external components and with best in class low power
performance.
Ethernet/IP Communications Development Platform Allows designers to mplement Ethernet/IP
communications standards in a broad range of industrial automation equipment. It enables
low foot print designs in applications such as industrial automation, factory automation or
industrial communication with minimal external components and with best in class low power
performance.
Acontis EtherCAT Master Stack Reference Design Highly portable software stack that can be used on
various embedded platforms. The EC-Master supports the high performane TI Sitara MPUs,
it provides a sophisticated EtherCAT Master solution which customers can use to implement
EtherCAT communication interface boards, EtherCAT based PLC or motion control
applications. The EC-Master architectural design does not require additional tasks to be
scheduled, thus the full stack functionality is available even on an OS less platform such as
TI Starterware suported on AM335x. Due to this architecture combined with the high speed
Ethernet driver it is possible to implement EtherCAT master based applications on the Sitara
platform with short cycle times of 100 microseconds or even below.
204 Device and Documentation Support
Submit Documentation Feedback
Product Folder Links: AMIC110
Copyright © 2016, Texas Instruments Incorporated