HD64F7144F50V Datasheet, PDF (236/932 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

10. Direct Memory Access Controller (DMAC)
Dual Address Mode:
Dual address mode is used for access of both the transfer source and destination by address.
Transfer source and destination can be accessed either internally or externally. Dual address mode
is subdivided into two other modes: direct address transfer mode and indirect address transfer
mode.
• Direct Address Transfer Mode
Data is read from the transfer source during the data read cycle, and written to the transfer
destination during the write cycle, so transfer is conducted in two bus cycles. At this time, the
transfer data is temporarily stored in the DMAC. With the kind of external memory transfer
shown in figure 10.6, data is read from one of the memories by the DMAC during a read cycle,
then written to the other external memory during the subsequent write cycle. Figure 10.7
shows the timing for this operation.
1st bus cycle
DMAC
SAR
Memory
DAR
Transfer source
module
Data buffer
Transfer destination
module
The SAR value is taken as the address, and data is read from the transfer source
module and stored temporarily in the DMAC.
2nd bus cycle
DMAC
SAR
Memory
DAR
Transfer source
module
Data buffer
Transfer destination
module
The DAR value is taken as the address, and data stored in the DMAC's data
buffer is written to the transfer destination module.
Figure 10.6 Direct Address Operation during Dual Address Mode
Rev.4.00 Mar. 27, 2008 Page 190 of 882
REJ09B0108-0400