PIC18F44J50-I Datasheet, PDF (77/562 Pages) Microchip Technology – 28/44-Pin, Low-Power, High-Performance USB Microcontrollers

PIC18F46J50 FAMILY
6.0 MEMORY ORGANIZATION
There are two types of memory in PIC18 Flash
microcontrollers:
• Program Memory
• Data RAM
As Harvard architecture devices, the data and program
memories use separate busses; this allows for
concurrent access of the two memory spaces.
Section 7.0 “Flash Program Memory” provides
additional information on the operation of the Flash
program memory.
6.1 Program Memory Organization
PIC18 microcontrollers implement a 21-bit Program
Counter, which is capable of addressing a 2-Mbyte
program memory space. Accessing a location between
the upper boundary of the physically implemented
memory and the 2-Mbyte address returns all ‘0’s (a
NOP instruction).
The PIC18F46J50 family offers a range of on-chip
Flash program memory sizes, from 16 Kbytes (up to
8,192 single-word instructions) to 64 Kbytes
(32,768 single-word instructions).
Figure 6-1 provides the program memory maps for
individual family devices.
FIGURE 6-1:
MEMORY MAPS FOR PIC18F46J50 FAMILY DEVICES
CALL, CALLW, RCALL,
PC<20:0>
21
RETURN, RETFIE, RETLW,
ADDULNK, SUBULNK
Stack Level 1

Stack Level 31
PIC18FX4J50
On-Chip
Memory
Config. Words
PIC18FX5J50
On-Chip
Memory
PIC18FX6J50
On-Chip
Memory
000000h
003FFFh
Config. Words
007FFFh
Config. Words _00FFFFh
Unimplemented
Read as ‘0’
Unimplemented
Read as ‘0’
Unimplemented
Read as ‘0’
1FFFFFF
Note: Sizes of memory areas are not to scale. Sizes of program memory areas are enhanced to show detail.
 2011 Microchip Technology Inc.
DS39931D-page 77