PIC18F44J50-I Datasheet, PDF (160/562 Pages) Microchip Technology – 28/44-Pin, Low-Power, High-Performance USB Microcontrollers

PIC18F46J50 FAMILY
REGISTER 10-19: RPINR22: PERIPHERAL PIN SELECT INPUT REGISTER 22 (BANKED EFCh)
U-0
—
bit 7
U-0
U-0
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
—
—
SCK2R4 SCK2R3
SCK2R2
SCK2R1
SCK2R0
bit 0
Legend:
R = Readable bit
-n = Value at POR
R/W = Readable, Writable bit if IOLOCK = 0
W = Writable bit
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
SCK2R<4:0>: Assign SPI2 Clock Input (SCK2) to the Corresponding RPn Pin bits
REGISTER 10-20: RPINR23: PERIPHERAL PIN SELECT INPUT REGISTER 23 (BANKED EFDh)
U-0
—
bit 7
U-0
U-0
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
—
—
SS2R4
SS2R3
SS2R2
SS2R1
SS2R0
bit 0
Legend:
R = Readable bit
-n = Value at POR
R/W = Readable, Writable bit if IOLOCK = 0
W = Writable bit
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
SS2R<4:0>: Assign SPI2 Slave Select Input (SS2IN) to the Corresponding RPn Pin bits
REGISTER 10-21: RPINR24: PERIPHERAL PIN SELECT INPUT REGISTER 24 (BANKED EFEh)
U-0
—
bit 7
U-0
U-0
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
—
—
OCFAR4 OCFAR3
OCFAR2
OCFAR1 OCFAR0
bit 0
Legend:
R = Readable bit
-n = Value at POR
R/W = Readable, Writable bit if IOLOCK = 0
W = Writable bit
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
OCFAR<4:0>: Assign PWM Fault Input (FLT0) to the Corresponding RPn Pin bits
DS39931D-page 160
 2011 Microchip Technology Inc.