PIC18F44J50-I Datasheet, PDF (390/562 Pages) Microchip Technology – 28/44-Pin, Low-Power, High-Performance USB Microcontrollers

PIC18F46J50 FAMILY
23.7 Comparator Operation During
Sleep
When a comparator is active and the device is placed
in Sleep mode, the comparator remains active and the
interrupt is functional if enabled. This interrupt will
wake-up the device from Sleep mode when enabled.
Each operational comparator will consume additional
current. To minimize power consumption while in Sleep
mode, turn off the comparators (CON = 0) before
entering Sleep. If the device wakes up from Sleep, the
contents of the CMxCON register are not affected.
23.8 Effects of a Reset
A device Reset forces the CMxCON registers to their
Reset state. This forces both comparators and the
voltage reference to the OFF state.
TABLE 23-3: REGISTERS ASSOCIATED WITH COMPARATOR MODULE
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Reset
Values
on Page:
INTCON
GIE/GIEH PEIE/GIEL TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF
69
PIR2
OSCFIF CM2IF
CM1IF USBIF BCL1IF HLVDIF TMR3IF CCP2IF
71
PIE2
OSCFIE CM2IE CM1IE USBIE BCL1IE HLVDIE TMR3IE CCP2IE
71
IPR2
OSCFIP CM2IP CM1IP USBIP BCL1IP HLVDIP TMR3IP CCP2IP
71
CMxCON
CON
COE
CPOL EVPOL1 EVPOL0 CREF CCH1 CCH0
70
CVRCON
CVREN CVROE CVRR
r
CVR3 CVR2 CVR1 CVR0
74
CMSTAT
—
—
—
—
—
—
COUT2 COUT1
73
ANCON0 PCFG7⁽¹⁾ PCFG6⁽¹⁾ PCFG5⁽¹⁾ PCFG4 PCFG3 PCFG2 PCFG1 PCFG0
74
TRISA
TRISA7 TRISA6 TRISA5
—
TRISA3 TRISA2 TRISA1 TRISA0
72
Legend: — = unimplemented, read as ‘0’, r = reserved. Shaded cells are not related to comparator operation.
Note 1: These bits and/or registers are not implemented on 28-pin devices.
DS39931D-page 390
 2011 Microchip Technology Inc.