PIC18F44J50-I Datasheet, PDF (503/562 Pages) Microchip Technology – 28/44-Pin, Low-Power, High-Performance USB Microcontrollers

PIC18F46J50 FAMILY
30.3 DC Characteristics:PIC18F46J50 Family (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VOL
D080
VOH
D090
Output Low Voltage
I/O Ports:
PORTA (except RA6),
PORTD, PORTE
PORTB, PORTC, RA6
Output High Voltage
I/O Ports:
PORTA (except RA6),
PORTD, PORTE
PORTB, PORTC, RA6
—
0.4
V IOL = 2 mA, VDD = 3.3V,
-40C to +85C
—
0.4
V IOL = 8.5 mA, VDD = 3.3V,
-40C to +85C
V
2.4
—
V IOH = -2 mA, VDD = 3.3V,
-40C to +85C
2.4
—
V IOH = -6 mA, VDD = 3.3V,
-40C to +85C
Capacitive Loading Specs
on Output Pins
D101 CIO All I/O Pins and OSC2
—
50
pF To meet the AC Timing
Specifications
D102 CB
SCLx, SDAx
—
400
pF I²C™ Specification
Note 1:
2:
3:
4:
5:
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
Negative current is defined as current sourced by the pin.
Only available on 44-pin devices.
When used as general purpose inputs, the RC4 and RC5 thresholds are referenced to VUSB instead of VDD.
Refer to Table 10-2 for pin tolerance levels.
 2011 Microchip Technology Inc.
DS39931D-page 503