|
MC68HC08XL36 Datasheet, PDF (324/362 Pages) Freescale Semiconductor, Inc – HCMOS Microcontroller Unit | |||
|
◁ |
Speciï¬cations
Freescale Semiconductor, Inc.
DC Electrical
Characteristics
Table 4. DC Electrical Characteristics (VDD = 5.0 Vdc ± 10%) (1)
Characteristic
Output High Voltage
(ILoad = â 2.0 mA) All I/O Pins
Output Low Voltage
(ILoad = 1.6 mA) All I/O Pins
Symbol
Min
Typ(2)
VOH
VDD â 0.8
â
VOL
â
â
Max
â
0.4
Unit
V
V
Input High Voltage
All Ports, IRQs, RESET, OSC1
Input Low Voltage
All Ports, IRQs, RESET, OSC1
VDD Supply Current
Run(3)
Wait(4)
VIH
0.7 x VDD
â
VDD
V
VIL
VSS
â
0.2 x VDD V
â
â
30
mA
â
â
12
mA
Stop(5)
25 °C
0 °C to 85 °C
25 °C with LVI Enabled
0 °C to 85 °C with LVI Enabled
IDD
â
â
5
µA
â
â
15
µA
â
â
320
µA
â
â
380
µA
I/O Ports Hi-Z Leakage Current
IIL
â
â
± 10
µA
Input Current
IIN
â
â
1
µA
Capacitance
Ports (as Input or Output)
COut
â
â
12
pF
CIn
â
â
8
pF
Low Voltage Reset Inhibit
VLVR
2.6
2.7
2.8
V
Low Voltage Reset Inhibit/Recover Hysteresis HLVR
60
80
100
mV
POR ReArm Voltage(6)
VPOR
0
â
100
mV
POR Reset Voltage(7)
VPORRST
0
700
800
mV
POR Rise Time Ramp Rate(8)
RPOR
0.035
â
â
V/ms
1. VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted.
2. Typical values reflect average measurements at midpoint of voltage range, 25°C only.
3. Run (operating) IDD measured using external square wave clock source (fosc = 32.8 MHz). All inputs 0.2V from
rail. No dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2
capacitance linearly affects Run IDD. Measured with all modules enabled.
4. Wait IDD measured using external square wave clock source (fosc = 32.8 MHz). All inputs 0.2V from rail. No dc
loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance
linearly affects Wait IDD. Measured with PLL and LVI enabled.
5. Stop IDD measured with OSC1 = VSS.
6. Maximum is highest voltage that POR is guaranteed.
7. Maximum is highest voltage that POR is possible.
8. If minimum VDD is not reached before the power-on reset is released, RST must be driven low externally until
minimum VDD is reached.
MC68HC08XL36
324
Specifications
For More Information On This Product,
Go to: www.freescale.com
4-spec_b
MOTOROLA
|
▷ |