MC68HC08XL36 Datasheet, PDF (19/362 Pages) Freescale Semiconductor, Inc – HCMOS Microcontroller Unit

Port D I/O Pins
(PD7/KBD7–
PD0/KBD0)
Port E I/O Pins
(PE7/TCH3–PE0)
Port F I/O Pins
(PF5–PF0/SS)
Port G I/O Pins
(PG3–PG0)
Port H I/O Pins
(PH3–PH0)
Freescale Semiconductor, Inc.
Introduction
Ordering Information
PD7/KBD7–PD0/KBD0 are general-purpose bidirectional I/O port pins.
Any or all of the port D pins can be programmed to serve as keyboard
interrupt pins. (See Input/Output Ports on page 271.)
Port E is an 8-bit special function port that shares five of its pins with the
TIM and two of its pins with the SCI. (See Timer Interface Module (TIM)
on page 163, Serial Communications Interface Module (SCI) on page
227, and Input/Output Ports on page 271.)
Port F is a 6-bit special function port that shares four of its pins with the
SPI. (See Serial Peripheral Interface Module (SPI) on page 191 and
Input/Output Ports on page 271.)
PG3–PG0 are general-purpose bidirectional I/O pins. (See Input/Output
Ports on page 271.) Port G is available only with the 64-pin package.
PH3–PH0 are general-purpose bidirectional I/O pins. (See Input/Output
Ports on page 271.) Port H is available only with the 64-pin package.
Ordering Information
MCU Ordering
Forms
To initiate an order for a ROM-based MCU, first obtain the current
ordering form for the MCU from a Motorola representative. Submit the
following items when ordering MCUs:
• A current MCU ordering form that is completely filled out
(Contact your Motorola sales office for assistance.)
• A copy of the customer specification if the customer specification
deviates from the Motorola specification for the MCU
• Customer’s application program on one of the media listed in
Application Program Media on page 20.
9-intro_a
MOTOROLA
Introduction
For More Information On This Product,
Go to: www.freescale.com
MC68HC08XL36
19