C509-L_97 Datasheet, PDF (2/290 Pages) Siemens Semiconductor Group – 8-Bit CMOS Microcontroller

C509-L Data Sheet
Revision History :
10.97
Previous Releases :
06.96 (Original Version)
Page (new Page (prev. Subjects (changes since last revision)
version) version)
1-6
1-11
3-1
3-12
4-12
6-6
6-28
6-78
6-85
6-88
6-93
7-13
7-16
11-1
11-3, 11-4
11-1, 11-5,
11-7
11-7 to11-9
Chapter 12
1-6
1-11
3-1
3-12
4-12
6-6
6-28
6-78
6-85
6-88
6-93
7-13
7-16
11-1
11-3
11-1, 11-5,
11-7
11-6 to11-8
Chapter 12
Duty cycle for XTAL2 corrected
RESET : correction in text “for the duration of two machine cycles“
Correction in text : XRAM is internal
1st paragraph: sentence “Bit Swap is ...” added;
Table 3-2: Text in right column corrected
Figure 3-7; corrected and improved
Last paragraph og 4.4.2 : last sentence deleted
Correction in figure 6-4 and text : “Delay = 1 state“
Correction in text 2nd paragraph : “consists of three ...“
Abbreviations below table 6-10 added
Name of bit T1P2 corrected to T2P0
Formula for mode 1,3 baud rate corrected; last sentence added
Formula for mode A,B baud rate corrected
Several references in the text corrected from IRCON to IRCON0
Description of ICR and ICS added
V_IL2 modified
Improved and extended I_CC specification
V_CC min. changed from 5V - 15% to 5V - 5%
AC characteristics : 16 MHz clock oscillator duty cycle (DC) for
external clock changed to 0.45 to 0.55
Improved index; bold page numbers for main definition reference
Edition 10.97
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
© Siemens AG 1997
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for
applications, processes and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or
the Siemens Companies and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales
office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice
you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components¹ of the Semiconductor Group of Siemens AG, may only be used in life-support devices or
systems² with the express written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that
device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endan-
gered.